To the top of the document
Volt
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Front End Inflatable Restraint Discriminating Sensor Replacement


2411266

Callout

Component Name

Warning: Refer to SIR Warning in the Preface section.

Preliminary Procedures

  1. Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling .
  2. Remove the front sight shield. Refer to Front Compartment Front Sight Shield Replacement : Volt  → Ampera .

1

Inflatable Restraint Front End Sensor Adaptor Fastener

Caution: Refer to Fastener Caution in the Preface section.

Tighten
9 N·m (80 lb in)

2

Inflatable Restraint Front End Discriminating Sensor Nut

Tighten
9 N·m (80 lb in)

3

Inflatable Restraint Front End Discriminating Sensor Bracket (Qty: 2)

4

Inflatable Restraint Front End Discriminating Sensor Assembly (Qty: 2)

Procedure

  1. Loosen the bolts and slide the sensor out of the keyhole slots.
  2. The bolts are integral to the sensor assembly and DO NOT remove separately.

Tighten
7.5 N·m (66 lb in)

   


© Copyright Chevrolet. All rights reserved