To the top of the document
Volt
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Air Conditioning and Heater Module Assembly Removal and Installation


2389981

Callout

Component Name

Preliminary Procedures

  1. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging : High Voltage Electric Compressor .
  2. Drain the cooling system. Refer to Cooling System Draining and Filling .
  3. Remove the instrument panel tie bar. Refer to Instrument Panel Tie Bar Replacement .
  4. Disconnect the HVAC module electrical connectors.
  5. Remove the air conditioning evaporator thermal expansion valve tube. Refer to Air Conditioning Evaporator Thermal Expansion Valve Tube Replacement .
  6. Remove the heater water shutoff valve actuator inlet. Refer to Heater Water Shutoff Valve Actuator Inlet Hose Replacement .
  7. Remove the heater inlet hose. Refer to Heater Inlet Hose Replacement .

1

HVAC Module Assembly Fastener (Qty: 1)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
10 N·m (89 lb in)

2

Heater and Air Conditioning Evaporator and Blower Module

   


© Copyright Chevrolet. All rights reserved