To the top of the document
Volt
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Bonnet Primary Catch Release Cable Replacement


2393850

Callout

Component Name

Preliminary Procedures

  1. Remove the front compartment side sight shield. Refer to Front Compartment Side Sight Shield Replacement : Volt → Ampera .
  2. Remove the front fascia. Refer to Front Bumper Fascia Removal and Installation : Volt → Ampera .
  3. Remove the left headlamp. Refer to Headlamp Replacement : Volt → Ampera .
  4. Remove the air inlet grille. Refer to Air Inlet Grille Panel Replacement .

1

Bonnet Primary Latch Cable

Procedure

Disconnect the bonnet primary latch release cable from the primary bonnet latch. Refer to Bonnet Primary and Secondary Catch Replacement : Volt → Ampera .

2

Bonnet Primary Latch Release Cable Retainer

Procedure

Disconnect the bonnet release cable retainers from the bonnet release cable.

3

Bonnet Primary Latch Release Cable Grommet

Procedure

Compress the grommet and press through the hole toward the passenger compartment.

4

Bonnet Primary Catch Release Cable

Procedure

  1. Remove the bonnet primary latch release cable handle by pressing the release cable handle upward to release the retainers from the instrument panel bracket.
  2. Pull the bonnet primary latch release cable out from the passenger compartment.
   


© Copyright Chevrolet. All rights reserved