Service Information

Volt

Circuit Testing

The Circuit Testing section contains the following diagnostic testing information. Using this information along with the diagnostic procedures will identify the cause of the electrical malfunction.

•	Using Connector Test Adapters

•	Probing Electrical Connectors

•	Fault-finding with a Digital Multimeter

•	Fault-finding with a Test Lamp

•	Using Fused Jumper Wires

•	Measuring Voltage

•	Measuring Voltage Drop

•	Measuring Frequency

•	Testing Ground and Low Reference Circuits

•	Testing for Continuity

•	Testing for Short to Ground

•	Testing for a Short to Voltage

•	Testing for Intermittent Conditions and Poor Connections

•	Inducing Intermittent Fault Conditions

•	Testing for Electrical Intermittents

•	Scan Tool Snapshot Procedure

•	Circuit Protection - Fuses

•	Circuit Protection - Circuit Breakers

•	Circuit Protection - Fusible Links