Preliminary Procedure

Remove the driver or passenger seat back cushion finish cover. Refer to Driver or Passenger Seat Back Cushion Finish Panel Replacement

1

Driver or Passenger Seat Back Cushion Pad Wire Rivet (Qty: 2)

Warning: Use the proper eye protection when drilling to prevent metal chips from causing physical injury.

Procedure

1. Unhook seat back cushion cover J-hooks.
2. Disengage the seat back lumbar wire from the cushion wire.
3. Drill out all of the guide rivets before removing the pad wire.

2

Driver or Passenger Seat Back Cushion Pad Wire

Procedure

When re-installing the cushion pad wire, re-rivet at the same location on the cushion frame with new rivets.