To the top of the document
Volt
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Air Conditioning Compressor and Evaporator Hose Replacement

Removal Procedure
  1. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging : High Voltage Electric Compressor
  2. Remove the throttle body. Refer to Throttle Body Assembly Replacement .
  3. Remove wire retainers from air conditioning compressor and evaporator hose.
  4. Disconnect the EVAP purge solenoid hose from the purge solenoid and reposition. Refer to Plastic Collar Quick Connect Fitting Service .

    5. 2391374
  5. Remove the air conditioning compressor and evaporator hose nut (1) at air conditioning compressor front hose.
  6. Remove the air conditioning compressor and evapoprator hose (2) from air conditioning compressor front hose.

    7. 2402614
  7. Remove the air conditioning compressor and evaporator hose nut (1) at the air conditiong evaporator.
  8. Remove the air conditioning compressor and evaporator hose nut (2) at the drive motor battery coolant cooler
  9. Remove the air conditioning compressor and evaporator hose (3) from the vehicle.

Installation Procedure

    2402614
  1. Install the air conditioning compressor and evaporator hose (3) to the vehicle.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the air conditioning compressor and evaporator hose nut (2) at the drive motor battery coolant cooler and tighten to 17 N·m (13 lb ft)
  3. Install the air conditioning compressor and evaporator hose nut (1) at the air conditioning evaporator and tighten to 17 N·m (13 lb ft).

    4. 2391374
  4. Install the air conditioning compressor and evaporator hose (2) to air conditioning compressor front hose.
  5. Install the air conditioning compressor and evaporator hose nut (1) at air conditioning compressor front hose and tighten to 22 N·m (16 lb ft).
  6. Connect the EVAP purge solenoid hose from the purge solenoid. Refer to Plastic Collar Quick Connect Fitting Service .
  7. Install wire retainers from air conditioning compressor and evaporator hose.
  8. Install the throttle body. Refer to Throttle Body Assembly Replacement .
  9. Evacuate and charge the refrigerant system. Refer to Refrigerant Recovery and Recharging : High Voltage Electric Compressor .
   


© Copyright Chevrolet. All rights reserved