To the top of the document
Volt
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Drive Motor Battery Coolant Flow Control Valve Replacement


2392400

Callout

Component Name

Preliminary Procedure

  1. Remove the throttle body assembly. Refer to Throttle Body Assembly Replacement
  2. Remove both 40-way wire harness connectors.
  3. Pinch and remove the drive motor battery coolant outlet hose from valve. Refer to Drive Motor Battery Coolant Outlet Hose Replacement
  4. Pinch and remove the drive motor battery coolant cooler inlet hose from valve. Refer to Drive Motor Battery Coolant Cooler Inlet Hose Replacement
  5. Pinch and remove the drive motor battery coolant flow control valve inlet hose assembly from valve. Refer to Drive Motor Battery Coolant Cooler Inlet Hose Assembly Replacement
  6. Disconnect the electrical connector from the drive motor battery coolant flow control valve.

1

Drive Motor Battery Coolant Flow Control Valve.

Tip
Prevent coolant contact with electrical connectors.

Procedure

  1. Use a nut to compress the two plastic clips that retain the valve to the metal bracket.
  2. Check and fill the coolant. Refer to Drive Motor Battery Cooling System Draining and Filling
  3. Perform the drive motor battery coolant flow control valve learn procedure.
   


© Copyright Chevrolet. All rights reserved