To the top of the document
Volt
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Drive Motor Battery Coolant Cooler Inlet Hose Replacement


2420494

Callout

Component Name

Preliminary Procedure

  1. Drain the coolant. Refer to Drive Motor Battery Cooling System Draining and Filling
  2. Remove the air conditioning compressor and evaporator hose. Refer to Air Conditioning Compressor and Evaporator Hose Replacement
  3. Reposition the air conditioning evaporator thermal expansion valve tubes from the TXV valve. Refer to Air Conditioning Evaporator Thermal Expansion Valve Tube Replacement

1

Drive Motor Battery Coolant Cooler Inlet Hose Clamp.

Procedure

Reposition the drive motor battery coolant cooler inlet hose clamp using BO-38185 Hose Clamp Pliers

Special Tools

BO-38185 Hose Clamp Pliers

For equivalent regional tools, Refer toSpecial Tools

2

Drive Motor Battery Coolant Cooler Inlet Hose Quick Connect Fitting.

3

Drive Motor Battery Coolant Cooler Inlet Hose

Tip
Replace corroded hose clamps and brackets.

   


© Copyright Chevrolet. All rights reserved