To the top of the document
Volt
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Drive Motor Generator Control Module Radiator Outlet Hose Replacement


2420498

Callout

Component Name

Preliminary Procedure

  1. Drain the coolant. Refer to Drive Motor Generator Power Inverter Module Cooling System Draining and Filling
  2. Remove the front wheelhouse front liner on the driver's side. Refer to Front Wheelhouse Front Liner Replacement
  3. Remove the drive motor generator power inverter module cover. Refer to Drive Motor Generator Power Inverter Module Cover Replacement

1

Drive Motor Generator Conrtrol Module Radiator Outlet Hose Clamp

Procedure

Reposition the drive motor generator control module radiator outlet hose clamp using BO-38185 Hose Clamp Pliers

Special Tools

BO-38185 Hose Clamp Pliers

For equivalent regional tools, Refer toSpecial Tools

2

Drive Motor Generator Control Module Radiator Outlet Hose Quick Connect Fitting

3

Drive Motor Generator Control Module Radiator Outlet Hose

Tip
Replace corroded hose clamps and brackets.

   


© Copyright Chevrolet. All rights reserved