To the top of the document
Volt
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Fuel Pressure Sensor Replacement - Fuel Feed Pipe


2415520

Callout

Component Name

Preliminary Procedure

  1. Remove the drive motor battery. Refer to Drive Motor Battery Replacement and Shipping Preparation .
  2. Relive the fuel system pressure.
  3. Disconnect the fuel pressure sensor electrical connector.
  4. Place a drain pan underneath the vehicle.

1

Fuel Pressure Sensor

Caution: Refer to Fastener Caution in the Preface section.

Tighten
19 N·m(14 lb ft)

   


© Copyright Chevrolet. All rights reserved