To the top of the document
Volt
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Bonnet Ajar Indicator Description and Operation

Bonnet Ajar Indicator System Components

    • Body control module (BCM)
    • Hybrid Powertrain Control Module 2
    • Driver information centre
    • Bonnet ajar switch, part of the bonnet latch assembly

Bonnet Ajar Operation - Body Control Module

The BCM applies B+ to the bonnet ajar signal circuit and monitors the voltage to determine the position of the bonnet. The bonnet ajar switch contains a multiplexed resistor. This resistor will vary the voltage seen by the BCM by pulling down the applied voltage based on the position of the switch.

Bonnet Ajar Operation - Hybrid Powertrain Control Module 2

The hybrid powertrain control module 2 applies B+ to the bonnet ajar signal circuit and monitors the voltage to determine the position of the bonnet. The bonnet ajar switch contains a multiplexed resistor. This resistor will vary the voltage seen by the hybrid powertrain control module 2 by pulling down the applied voltage based on the position of the switch.

   


&#169© Copyright Chevrolet. All rights reserved