To the top of the document
Volt
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Camshaft Cover Installation

  1. Clean the sealing surfaces.

  2. 2190649

    Note: The thickness of the sealing bead should be 2 mm (0.0787 in).

  3. Apply sealing compound to areas (1) and (2). Refer to Adhesives, Fluids, Lubricants, and Sealers .

  4. 2190620

    Note: The installation procedure should not take longer than 10 minutes.

  5. Install the camshaft cover (2) and a NEW gasket (3).
  6. Install the 15 camshaft cover bolts (1).

  7. 2190648
  8. Tighten the 15 camshaft cover bolts in a sequence as shown to 8 N·m (71 lb in).

  9. 2190647
  10. Install the oil level indicator (1).
   


© Copyright Chevrolet. All rights reserved