To the top of the document
Volt
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Control Valve Body Replacement


2531464

Callout

Component Name

Preliminary Procedures

  1. Remove the control solenoid valve and transmission control module assembly. Refer to Control Solenoid Valve and Transmission Control Module Assembly Replacement .
  2. For removal of the manual shift shaft position switch, refer to Manual Shift Shaft Position Switch and Fluid Level Control Valve Removal .
  3. For installation of the manual shift shaft position switch, refer to Manual Shift Shaft Position Switch and Fluid Level Control Valve Installation .

1

Control Valve Body Bolt M6 x 42 mm (Qty: 5)

Caution: Refer to Fastener Caution in the Preface section.

Procedure

Tighten the bolts in the sequence shown.

Tighten
10 N·m (89 lb in)

2

Control Valve Body Bolt M6 x 48 mm (Qty: 12)

Procedure

Tighten the bolts in the sequence shown.

Tighten
10 N·m (89 lb in)

3

Control Valve Channel Plate Assembly

4

Control Valve Body

5

Control Valve Body Ball Check Valve (Qty: 2)

   


© Copyright Chevrolet. All rights reserved