To the top of the document
Volt
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

DTC P262B

Diagnostic Instructions

    • Perform the Diagnostic System Check - Vehicle prior to using this diagnostic procedure.
    • Review Strategy Based Diagnosis for an overview of the diagnostic approach.
    • Diagnostic Procedure Instructions provides an overview of each diagnostic category.

DTC Descriptor

DTC P262B 00: Control Module Power Off Timer Performance

Circuit/System Description

This diagnostic applies to internal microprocessor integrity conditions within the control module. No external circuits are involved.

Conditions for Running the DTC

    • Vehicle ON.
    • The hybrid powertrain control module 2 has been awake for at least 1 minute.
    • DTC P0601, P0602, P0603, P0604, P0606, or P062F is not set.

Conditions for Setting the DTC

The control module detects an internal malfunction.

Action Taken When the DTC Sets

DTC P262B is a Type B DTC.

Conditions for Clearing the DTC

DTC P262B is a Type B DTC.

Diagnostic Aids

    • This DTC may be stored as a history DTC without affecting the operation of the control module.
    • If stored only as a history DTC and not retrieved as a current DTC, do not replace the control module.

Circuit/System Verification

Verify that DTC P262B is not set.

If the DTC is set, replace the control module that set the DTC.

Repair Instructions

Perform the Diagnostic Repair Verification after completing the diagnostic procedure.

Control Module References for control module replacement, programming and setup

   


&#169© Copyright Chevrolet. All rights reserved