If an I/M System Status indicator did NOT update to YES during the Inspection/Maintenance Complete System Set Procedure , review each indicator and reference this table to determine each DTC associated with the I/M System Status Indicator. Each DTC listed below has specific conditions that must be met for the diagnostic to run. Included within the conditions are additional DTCs which, if set, may inhibit the DTCs listed below from running. Reviewing and operating the vehicle within the Conditions for Running for each DTC listed below will allow the I/M System Status Indicators to transition to YES.

Catalyst

DTC P0420

EVAP

Fuel

DTC P219A

Oxygen Sensor

Oxygen Sensor Heater

DTC P0030, P0036, P0053, P0054, P0135, or P0141

Camshaft Position

DTC P0011 or P0014