Preliminary Procedures

1. Remove the front bumper fascia. Refer to Front Bumper Fascia Removal and Installation : Volt → Ampera .
2. Remove the front compartment side sight shield. Refer to Front Compartment Side Sight Shield Replacement : Volt → Ampera .
3. Disconnect the headlamp electrical connection.

1

Headlamp Screw (Qty: 4)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2.5 N·m (22 lb in)

2

Headlamp Assembly

Warning: Refer to Halogen Bulb Warning in the Preface section.

Procedure

1. Remove the headlamp assembly from the vehicle.
2. Transfer the headlamp bulb accessory cover and bulb socket as needed.
3. Align the headlamps after replacement. Refer to Headlamp Aiming .

Note: The drive motor battery charger is below the right front headlamp assembly.