Preliminary Procedures

1. Remove the front bumper fascia. Refer to Front Bumper Fascia Removal and Installation : Volt → Ampera .
2. Disconnect the forward lamp harness electrical connector from the front indicator lamp socket.
3. Transfer the bulb and bulb socket as needed, rotate counter-clockwise in order to remove.

1

Indicator Lamp Screw (Qty: 4)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2.5 N·m (22 lb in)

2

Indicator Lamp Assembly

Warning: Refer to Halogen Bulb Warning in the Preface section.