Preliminary Procedure

1. Remove the underbody rear air deflector. Refer to Underbody Rear Air Deflector Replacement .
2. Disconnect the electrical connector from the tail lamp harness.
3. Transfer the electrical connector jumper harness as needed.

1

Rear Bumper Fascia Lower Screw (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2.5 N·m (22 lb in)

2

Rear Energy Absorber Screw (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2.5 N·m (22 lb in)

3

Rear Fog Lamp