Preliminary Procedures

Warning: Use the proper eye protection when drilling to prevent metal chips from causing physical injury.

1. Remove the front bumper fascia. Refer to Front Bumper Fascia Removal and Installation : Volt → Ampera .
2. Drill and remove the two upper rivets from the corners of the front bumper upper fascia.
3. Remove the two locking retainers from the rear of the radiator grille.

1

Rivet (Qty: 2)

3

Radiator Grille Assembly

Procedure

1. Remove the grille assembly from the rear of the front bumper fascia.
2. Transfer the radiator grille emblem. Refer to Emblem/Nameplate Replacement .