To the top of the document
Volt
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Hybrid/EV Battery Pack Coolant Control Solenoid Valve Learn

Hybrid/EV Battery Pack Coolant Control Solenoid Valve Learn

The Hybrid/EV Battery Pack Coolant Control Solenoid Valve Learn procedure must be completed when the following components are replaced:

    • Hybrid/EV Powertrain Control Module 2
    • Hybrid/EV Battery Pack Coolant Control Solenoid Valve

The Hybrid/EV Battery Pack Coolant Control Solenoid Valve Learn procedure can be completed with a scan tool using the following steps:

  1. Install the scan tool to the data link connector.
  2. Vehicle in Service Mode, engine OFF.
  3. Select Hybrid/EV Battery Pack Coolant Control Solenoid Valve Learn in the Hybrid/EV Powertrain Control Module 2 Control Functions list.
  4. Follow the scan tool directions to complete the procedure.
  5. Clear any DTCs that may be set.
   


&#169© Copyright Chevrolet. All rights reserved