Volt

Hybrid/EV Battery Pack Data Reset

The Hybrid/EV Powertrain Control Module 2 Data Reset procedure must be completed when the following components are replaced:

The Hybrid/EV Powertrain Control Module 2 Data Reset procedure can be completed with a scan tool using the following steps:

1. Install the scan tool to the data link connector.
2. Ignition ON, engine OFF.
3. Select Hybrid/EV Battery Pack Data Reset in the Hybrid/EV Powertrain Control Module 2 Control Functions list
4. Follow the scan tool directions to complete the procedure.
5. Clear any DTCs that may be set.