Hybrid/EV Battery Pack Capacity Learn
Hybrid/EV Battery Pack Capacity Learn
The Hybrid/EV Battery Pack Capacity Learn procedure must be completed when the following components are replaced:
• | Hybrid/EV Powertrain Control Module 2 |
• | Hybrid/EV Battery Energy Control Module |
• | Hybrid/EV Battery Interface Control Module |
The Hybrid/EV Powertrain Control Module 2 Capacity Learn procedure can be completed with a scan tool using the following steps:
- Install the scan tool to the data link connector.
- Ignition ON, engine OFF.
- Select Hybrid/EV Battery Pack Capacity Reset in the Hybrid/EV Powertrain Control Module 2 Control Functions list
- Follow the scan tool directions to complete the procedure.
- Select Hybrid/EV Battery Pack Capacity Learn in the Hybrid/EV Powertrain Control Module 2 Control Functions list
- Follow the scan tool directions to complete the procedure.
- Clear any DTCs that may be set.
©© Copyright Chevrolet. All rights reserved |