Preliminary Procedures

1. Remove the front bumper fascia. Refer to Front Bumper Fascia Removal and Installation : Volt → Ampera .
2. Remove the front bumper lower fascia centre grille. Refer to Front Bumper Lower Fascia Centre Grille Replacement : Ampera .

1

Front Bumper Lower Fascia Screw (Qty: 2)

Caution : Refer to Fastener Caution in the Preface section.

Procedure

1. Carefully push a small nylon wedge between the upper fascia and the lower fascia. Insert a small flat-bladed tool into the fascia slot and depress the tabs one at a time and pull on the upper fascia at the same time to gradually remove the lower fascia from the upper fascia.
2. Transfer parts as needed.

Tighten
2.5 N·m (22 lb in)

2

Front Bumper Lower Fascia