To the top of the document
Volt
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Rear Bumper Fascia Removal and Installation - Volt


2393803

Callout

Component Name

Preliminary Procedures

  1. Remove the underbody rear air deflector to fascia bolts. Refer to Underbody Rear Air Deflector Replacement .
  2. Remove the rear screws from the wheelhouse liner. Refer to Rear Wheelhouse Panel Liner Replacement .

1

Rear Bumper Fascia Upper Screw (Qty: 2)

Caution : Refer to Fastener Caution in the Preface section.

Tighten
3 N·m (27 lb in)

2

Rear Bumper Fascia

Procedure

  1. Reposition the lower liftgate weatherstrip to access the centre fascia guide.
  2. Insert a small flat-bladed tool into the fascia centre guide and depress the snaps one at a time and pull on the fascia working from one side to the other to remove the fascia from the rear fascia guides.
  3. Disconnect the electrical connectors.
   


© Copyright Chevrolet. All rights reserved