Preliminary Procedures

1. Remove the rear bumper fascia. Refer to Rear Bumper Fascia Removal and Installation : Volt → Ampera .
2. Remove the rear bumper fascia energy absorber. Refer to Rear Bumper Energy Absorber Replacement : Volt → Ampera .

1

Rear Bumper Upper Fascia Retainer (Qty: 2)

Caution : Refer to Fastener Caution in the Preface section.

2

Rear Bumper Upper Fascia

Procedure

1. Carefully push a small nylon wedge between the upper fascia and the lower fascia. Insert a small flat-bladed tool into the fascia slot and depress the snaps one at a time and pull on the fascia at the same time to gradually remove the lower fascia from the upper fascia.
2. Transfer part as necessary.