Warning: Refer to Brake Fluid Irritant Warning in the Preface section.

Caution: Refer to Brake Fluid Effects on Paint and Electrical Components Caution in the Preface section.

Preliminary Procedure

1. Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement .
2. Loosen, but do not remove, the right side front suspension strut housing brace bolts.
3. Remove the left side front suspension strut housing brace bolts and gently lift the brace upward.

1

Brake Fluid Level Indicator Switch

Procedure

1. Disconnect the electrical connector.
2. Carefully spread the locking tabs and lift the brake fluid level indicator switch upward.
3. After the installation is complete, install the front suspension strut housing brace bolts. Refer to Front Suspension Strut Housing Brace Replacement .