Preliminary Procedure

1. Prepare the heater and air conditioning remote control for replacement. Refer to Control Module References .
2. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
3. Remove the communication interface module. Refer to Communication Interface Module Replacement .
4. Remove the instrument panel lower compartment. Refer to Instrument Panel Lower Compartment Replacement .

1

Communication Interface Module Bracket Bolt

Caution: Refer to Fastener Caution in the Preface section.

Tighten
4.5 N·m(40 lb in)

2

Body Control Module

Procedure

1. Remove the bracket mounting bolts and reposition to allow room to slide the module down.
2. Disconnect the electrical connections.
3. For programming and set-up procedures, refer to Control Module References .