Warning: Refer to SIR Warning in the Preface section.

Warning: Refer to SIR Inflator Module Handling and Storage Warning in the Preface section.

Preliminary Procedures

1. Move the front seat to a full forward and full up position.
2. Disable the SIR. Refer to SIR Disabling and Enabling .
3. Remove the centre pillar trim panel. Refer to Centre Pillar Trim Panel Replacement .

1

Driver or Passenger Seat Belt Tensioner Cover Assembly

2

Driver or Passenger Seat Belt Tensioner Fastener

Caution: Refer to Fastener Caution in the Preface section.

Tighten
7.5 N·m (66 lb in)

3

Driver or Passenger Seat Shoulder Belt Fastener

Tighten
45 N·m (33 lb ft)

4

Driver or Passenger Shoulder Belt Retractor Fastener

Tighten
45 N·m (33 lb ft)

5

Driver or Passenger Seat Belt Push On Retainer

Procedure

Use a flat-bladed tool to remove locking pin in retainer.

6

Driver or Passenger Seat Shoulder Belt Retractor Assembly

Procedure

Disconnect the electrical connector.