To the top of the document
Volt
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Engine Mount Replacement - Right Side


2399654

Callout

Component Name

Preliminary Procedures

  1. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
  2. Install engine support fixture. Refer to Engine Support Fixture .
  3. Prior to removing the mount, mark the mount location using spray paint or a marker for correct positioning during installation.

1

Engine Mount Fastener

Caution: Refer to Fastener Caution in the Preface section.

Tip
Perform the powertrain mount balancing - lower after installation of the fastener.

Tighten
50 N·m (37 lb ft)

2

Engine Mount Fastener (Qty: 2)

Tighten
58 N·m (43 lb ft)

3

Engine Mount Fastener (Qty: 3)

Procedure

Ensure the washer is in place before installing the bolt.

Tighten
58 N·m (43 lb ft)

4

Engine Mount

Procedure

Transfer components as necessary.

   


© Copyright Chevrolet. All rights reserved