To the top of the document
Volt
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Driver or Passenger Seat Replacement


2375697

Callout

Component Name

Warning: Refer to SIR Warning in the Preface section.

Preliminary Procedures

  1. Disable the SIR system. Refer to SIR Disabling and Enabling .
  2. Disconnect the front seat belt tensioner fastener by removing the cap, bolt, and cover. Refer to Driver or Passenger Seat Retractor Side Belt Replacement .

1

Front Seat Bolt (Qty: 4)

Caution: Refer to Fastener Caution in the Preface section.

Procedure

  1. Adjust the seat to the full forward position to gain access to the rear bolts.
  2. Remove the foot cover by pulling up on the rear of the cover and then pushing forward to gain access to the rear outboard bolts.
  3. Re-cut the threads of the body. Refer to Thread Inserts .
  4. Bolts are microencapsulated. Install NEW front seat bolts. DO NOT reuse the old bolts.

Tighten
45 N·m (33 lb ft)

2

Front Seat Assembly (Qty: 2)

Procedure

  1. Disconnect the electrical.
  2. With the aid of an assistant remove the front seat, by tilting the seat forward and then lifting and pulling the seat rearwards to disengage the front hooks.
  3. Transfer components as necessary.
   


© Copyright Chevrolet. All rights reserved