Preliminary Procedures

1. If replacing the driver side door hinges only, disable the high voltage system. Refer to High Voltage Disabling .
2. Remove the battery changer receptacle. Refer to Drive Motor Battery Charger Receptacle Replacement .
3. Remove the charger port door actuator. Refer to Charge Port Housing Replacement .
4. Remove the front side door. Refer to Front Side Door Replacement .

1

Front Side Door Upper Hinge to Body Bolts (Qty: 2)

Caution : Refer to Fastener Caution in the Preface section.

Tighten
30 N·m (22 lb ft)

2

Front Side Door Upper Hinge to Door Bolts (Qty: 2)

Tighten
30 N·m (22 lb ft)

3

Front Side Door Upper Hinge

4

Front Side Door Lower Hinge to Body Bolts (Qty: 2)

Procedure

Front side door check link bolt. Refer to upper front hinge removal.

Tighten
30 N·m (22 lb ft)

5

Front Side Door Lower Hinge to Door Bolts (Qty: 2)

Tighten
30 N·m (22 lb ft)

6

Front Side Door Lower Hinge

Procedure

Inspect the door for proper operation and alignment. Refer to Front Side Door Adjustment .