1
| Bonnet
Caution : Refer to Fastener Caution in the Preface section.
Procedure
- Loosen the 4 bonnet hinge nuts.
- Adjust the bonnet in order to obtain an even gap on both sides between the bonnet and the wings, the headlamps and the front bumper fascia and so that the bonnet is flush with both wings on the front edge, the front bumper fascia and the headlamps.
Adjustment:
| • | Bonnet to front wing (a) 3.0 mm ± 0.75 mm (0.12 in ± 0.03 in) |
| • | Bonnet to front wing (b) 3.0 mm ± 0.75 mm (0.12 in ± 0.04 in) |
| • | Bonnet to headlamp (c) 6.0 mm ± 1.5 mm (0.25 in ± 0.03 in) |
Tighten
25 N·m (18 lb ft) |
