Preliminary Procedures

1. Remove the windscreen wiper arms. Refer to Windscreen Wiper Arm Replacement : Passenger → Driver .
2. Remove the air inlet grille panel extensions. Refer to Air Inlet Grille Panel Extension Replacement .
3. Remove the bonnet rear weatherstrip. Refer to Bonnet Rear Weatherstrip Replacement : Volt → Ampera .

1

Air Inlet Grille Panel Push-In Retainer (Qty: 6)

2

Air Inlet Grille Panel

Procedure

1. Lift the forward edge grille panel high enough to clear the windscreen wiper transmission pivot shafts.
2. Use an appropriate plastic flat-bladed tool to release and remove the panel perpendicular from the lower retainers below the windscreen.
3. Remove the grille panel forward and out from the vehicle.