Front Wing Front Bracket Replacement
Removal Procedure
Warning : Refer to Approved Equipment for Collision Repair Warning in the Preface section.
Warning : Refer to Glass and Sheet Metal Handling Warning in the Preface section.
- Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
- Remove all related panels and components.
- Remove the sealers and anti-corrosion materials from the repair area as necessary.
- Drill off the front wing front bracket (1).
- Remove the front wing front bracket (1).
Installation Procedure
- Align the front wing front bracket (1) and clamp into position.
- Drill holes 4.2 mm for rivets to front wing front bracket (1) and front compartment upper side rail.
- Clean and prepare the attaching surfaces.
- Apply sealer part no.: 93165589 to attaching surfaces (1).
- Rivet the front wing front bracket (1) with waterproof steel rivets part no.: 93174636.
- Use sealer and seal the rivet heads.
- Apply the sealers and anti-corrosion materials to the repair area as necessary.
- Paint the repaired area.
- Install all related panels and components.
- Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
© Copyright Chevrolet. All rights reserved |