Service Information

Volt

Heater Inlet Pipe Adapter Replacement

Callout

Component Name

Danger: Always perform the High Voltage Disabling procedure prior to servicing any High Voltage component or connection. Personal Protection Equipment (PPE) and proper procedures must be followed.

The High Voltage Disabling procedure will perform the following tasks:

•	Identify how to disable high voltage.

•	Identify how to test for the presence of high voltage.

•	Identify conditions under which high voltage is always present and personal protection equipment (PPE) and proper procedures must be followed.

Failure to follow the procedures exactly as written may result in serious injury or death.

Preliminary Procedures

Disable high voltage system. Refer to High Voltage Disabling and High Voltage Enabling .
Remove the heater water shutoff valve actuator inlet hose. Refer to Heater Water Shutoff Valve Actuator Inlet Hose Replacement .

Heater Inlet Pipe Adapter Hose Clamps

Procedure

Reposition the heater inlet pipe adapter hose clamps using BO-38185 pliers.

Special Tools

BO-38185 Hose Clamp Pliers

For equivalent regional tools, refer to Special Tools .

Heater Inlet Pipe Adapter

Note: Replace corroded hose clamps and brackets.