Preliminary Procedure

Remove the starter motor. Refer to Starter Replacement : 2.0L Diesel LNP with MT → 2.0L Diesel LNP with AT → 1.4L LDD, LUH, and LUJ → 1.6L LDE, LXV, 1.8L 2H0, and LUW → 1.6L LXT,L2W → 2.0L Diesel LLW .

1

Crankshaft Position Sensor Fastener

Caution: Refer to Fastener Caution in the Preface section.

Procedure

Remove the crankshaft position sensor bolt

Tighten
4.5 N·m (40 lb in)

2

Crankshaft Position Sensor

Procedure

Disconnect all electrical connectors as needed.