To the top of the document
Cruze
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Fuel Injector Replacement

Removal Procedure
  1. Remove the fuel injector fuel feed pipe. Refer to Fuel Injector Fuel Feed Pipe Replacement .
  2. Disconnect the 4 fuel injector wiring harness plugs.

    3. 2027820
  3. Remove the fuel leak off clips (4) from the fuel injectors.

    4. Note: Be careful do not damage the leak off plastic connectors on the top from the injectors.

  4. Remove the 4 fuel injectors . Refer to Fuel Injector Removal .

Install Procedure
  1. Install the 4 fuel injectors . Refer to Fuel Injector Installation .

    2. 2027820
  2. Install the fuel leak off clips (4) to the fuel injectors.

    3. Note: Be careful do not damage the leak off plastic connectors on the top from the injectors.

  3. Connect the 4 fuel injector wiring harness plugs.
  4. Install the Fuel Injector Fuel Feed Pipe. Refer to Fuel Injector Fuel Feed Pipe Replacement .
   


© Copyright Chevrolet. All rights reserved