To the top of the document
Cruze
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Fuel Tank Filler Pipe Replacement


2028282

Callout

Component Name

Warning: Refer to Petrol/Petrol Vapours Warning in the Preface section.

Warning: Refer to Actions to Take When Working with Fuel Warning in the Preface section.

Warning: Refer to Safety Goggles and Fuel Warning in the Preface section.

Warning: Refer to Fuel Escape Warning in the Preface section.

Preliminary Procedures

  1. Open the bonnet.
  2. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection
  3. Remove fuel tank filler door. Refer to Fuel Tank Filler Door Replacement .
  4. Drain fuel tank if necessary. If the fuel level is over half filled. Refer to Fuel Tank Draining .
  5. Remove rear wheelhouse panel liner. Refer to Rear Wheelhouse Panel Liner Replacement .
  6. Remove fuel tank filler pipe housing. Refer to Fuel Tank Filler Pipe Housing Replacement .

1

Fuel Tank Filler Pipe Bracket Bolt

Caution: Refer to Fastener Caution in the Preface section.

Tighten
9 N·m (80 lb in)

2

Fuel Tank Filler Pipe Ground Bolt

Tighten
9 N·m (80 lb in)

3

Fuel Tank Filler Pipe Clamp

4

Lower Recirculation Tube Quick Release Fitting

5

Fuel Tank Filler Pipe

   


© Copyright Chevrolet. All rights reserved