Preliminary Procedures

1. Using a scan tool, check for DTCs.
2. Remove the forward lamp wiring harness. Refer to Forward Lamp Wiring Harness Replacement .
3. Remove the front floor panel carpet. Refer to Front Floor Panel Carpet Replacement .
4. Remove the instrument panel assembly. Refer to Instrument Panel Assembly Replacement .
5. Remove the brake, accelerator, and the clutch pedal. Refer to Brake, Accelerator, and Clutch Pedal Replacement : Right Hand Drive → Left Hand Drive .

1

Body Wiring Harness

Caution: Refer to Fastener Caution in the Preface section.

Procedure

1. Take photos of the original wiring harness routing for correct reinstallation.
2. Create a work area large enough to lay out the new and old wiring harnesses.
3. Use care when removing inaccessible harness retainers. Replacement retainers may not be available.
4. Compare the new and the old wiring harnesses for the same part number, the same number of wiring harness connectors, the same pin settings, and the same harness retainers.
5. Follow a logical order of steps during the replacement to ensure proper installation of the harness.
6. Using a scan tool, check for DTCs.