Captiva
Tire Pressure Indicator Sensor Replacement
Removal Procedure
Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle
.
Remove the tyre and wheel assembly. Refer to
Tyre and Wheel Removal and Installation
.
Remove the tyre from the wheel. Refer to
Tyre Dismounting and Mounting
.
Remove the tire pressure sensor from the valve using a TORX driver.
Remove the valve.
Installation Procedure
Apply soapy water to the surface of the valve for easy fitting.
Install the valve and the tire pressure sensor to the wheel.
Ensure the valve and the tire pressure sensor are seated properly.
Install the tyre to the wheel. Refer to
Tyre Dismounting and Mounting
.
Install the tyre and wheel assembly. Refer to
Tyre and Wheel Removal and Installation
.
Lower the vehicle.
© Copyright Chevrolet. All rights reserved