To the top of the document
Captiva
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Front Door Opening Weatherstrip Replacement


1866218

Callout

Component Name

Preliminary Procedures

  1. Remove the centre pillar lower garnish moulding. Refer to Centre Pillar Lower Garnish Moulding Replacement
  2. Remove the windshield pillar garnish molding. Refer to Windscreen Pillar Garnish Moulding Replacement : Long Body → Short Body
  3. Remove the front door sill plate. Refer to Front Side Door Opening Floor Carpet Retainer Replacement : Long Body  → Short Body .

1

Front Side Door Opening Weatherstrip

Procedure

  1. Install the weatherstrip to the pinch-weld flange. Ensure that the weatherstrip is fully seated.
  2. Mark the location of the weatherstrip opening when removing from the pinch weld.
  3. Align the weatherstrip to the door opening with the bond joint positioned at the lower centre of the door opening.
   


© Copyright Chevrolet. All rights reserved