To the top of the document
Captiva
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Power Steering Fluid Reservoir Replacement

Removal Procedure


    1768602
  1. Syphon the power steering fluid from the fluid reservoir.
  2. Remove the reservoir bolts.
  3. Caution: Refer to Power Steering Hose Disconnected Caution in the Preface section.

  4. Loosen the hose clamps and remove both hoses from the reservoir.

Installation Procedure


    1768602
  1. Attach the power steering fluid reservoir to the reservoir bracket.
  2. Caution: Refer to Installing Hoses without Twists or Bends Caution in the Preface section.

  3. Connect both hoses to the fluid reservoir and secure the hose clamps.
  4. Caution: Refer to Fastener Caution in the Preface section.

  5. Install the fluid reservoir bolts and tighten to 9 N·m (80 lb in).
  6. Caution: Refer to Using Proper Power Steering Fluid Caution in the Preface section.

  7. Fill the fluid reservoir with power steering fluid. Refer to Checking and Adding Power Steering Fluid .
  8. Caution: Refer to Air in the Power Steering System Caution in the Preface section.

  9. Bleed the system. Refer to Power Steering System Bleeding .
  10. Inspect the power steering system for leaks. If there are leaks, correct the cause of the leaks. Refer to Power Steering Fluid Leaks .
   


© Copyright Chevrolet. All rights reserved