To the top of the document
Captiva
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Drive Belt Tensioner Replacement - LE5, LE9 or LAF

Removal Procedure

    1571145
  1. Remove the drive belt. Refer to Drive Belt Replacement : LE5 or LE9
  2. Remove the drive belt tensioner bolt .
  3. Remove the drive belt tensioner.

Installation Procedure

    1571145
  1. Position the drive belt tensioner.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the drive belt tensioner bolt and tighten to 45 N·m (33 lb ft).
  3. Install the drive belt. Refer to Drive Belt Replacement : LE5 or LE9 .
   


© Copyright Chevrolet. All rights reserved