Preliminary Procedure

1. Remove the left instrument panel side trim panel. Refer to Instrument Panel Side Trim Panel Replacement : Long Body  → Short Body .
2. Remove the drivers knee bolster assembly. Refer to Driver Knee Bolster Replacement : Long Body  → Short Body .

1

Instrument Panel Molding Fastener

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2 N·m (18 lb in)

2

Instrument Panel Moulding Assembly

Procedure

1. Disconnect the electrical connections.
2. When replacing the instrument panel moulding, transfer all necessary components.

Tip
Left hand drive vehicle shown, right hand drive vehicle similar.