To the top of the document
Captiva
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Ignition Lock Cylinder Bulb Replacement


1874610

Callout

Component Name

Preliminary Procedure

Remove the steering column trim cover. Refer to Steering Column Trim Cover Replacement .

1

Key Hole Lamp Retaining Screw

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2.5 N·m (22 lb ft)

2

Ignition Key Alarm Switch Assembly

Procedure

  1. Disconnect the electrical connectors.
  2. Twist to release the key hole lamp bulb.
   


© Copyright Chevrolet. All rights reserved