Warning: Refer to Brake Dust Warning in the Preface section.

Preliminary Procedures

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the tyre and wheel. Refer to Tyre and Wheel Removal and Installation .
3. Remove the brake disc. Refer to Front Brake Disc Replacement .

1

Wheel Speed Sensor Electrical Connector

Procedure

Release the electrical connector from the bracket.

2

Wheel Speed Sensor Bolt

Caution: Refer to Fastener Caution in the Preface section.

Tighten
8 N·m (71 lb in)

3

Wheel Speed Sensor

Procedure

Route the wheel speed sensor electrical harness through the splash shield.