Warning: Refer to Brake Dust Warning in the Preface section.

Preliminary Procedures

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the tyre and wheel. Refer to Tyre and Wheel Removal and Installation .
3. Remove the park brake shoes. Refer to Handbrake Shoe Replacement .

1

Wheel Speed Sensor Electrical Connector

2

Wheel Speed Sensor Bolt

Caution: Refer to Fastener Caution in the Preface section.

Tighten
8 N·m (71 lb in)

3

Wheel Speed Sensor

Procedure

1. Release the wheel speed sensor electrical harness grommet from the backing plate.
2. Route the wheel speed sensor electrical harness through the backing plate.