Preliminary Procedure

Remove the rear bumper fascia. Refer to Rear Bumper Fascia Replacement .

1

Rear Bumper Fascia Skid Plate Screw (Qty: 4)

2

Rear Bumper Fascia Skid Plate Screw

Caution : Refer to Fastener Caution in the Preface section.

Procedure

Carefully push a small nylon wedge between the fascia and the rear fascia skid plate. Insert a small flat-bladed tool into the fascia slot and depress the snaps one at a time and pull on the fascia at the same time to gradually remove the fascia from the rear fascia skid plate.

Tighten
3 N·m (27 lb in)