To the top of the document
Captiva
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Rear Side Door Catch Replacement


1868787

Callout

Component Name

Preliminary Procedure

Remove the interior trim panel. Refer to Rear Side Door Trim Panel Replacement : Long Body  → Short Body .

1

Rear Side Door Latch Screws (Qty: 3)

Caution: Refer to Fastener Caution in the Preface section.

Procedure

  1. Remove the water deflector.
  2. Release the inside door handle cable retainers.
  3. Disconnect the rear side door latch electrical connector.
  4. Remove the rear side door latch rods.

Tighten
10 N·m (89 lb in)

2

Rear Side Door Catch

Procedure

Inspect the door for proper operation before installing the door trim panel.

   


© Copyright Chevrolet. All rights reserved