To the top of the document
Captiva
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Digital Radio Aerial Cable Replacement


1876345

Callout

Component Name

Preliminary Procedures

  1. Remove the left rear quarter upper trim panel. Refer to Quarter Upper Trim Panel Replacement : Long Body  → Short Body .
  2. Remove the left rear quarter lower trim panel. Refer to Quarter Lower Rear Trim Panel Replacement : Long Body  → Short Body .
  3. Lower the rear of the headliner as needed. Refer to Headlining Trim Panel Replacement : Long Body  → Short Body .

1

Digital Radio Aerial Cable Assembly

Procedure

  1. Disconnect the electrical connectors at each end of the cable.
  2. If the cable is taped into the wiring harness then cut the ends off the old cable and route the new cable close to the old one as possible using tie straps to secure the new cable.
   


© Copyright Chevrolet. All rights reserved